2015 DENVER Vision | Slab Polishing Lines

Description

I've got it running pretty well and operational but it still needs some love. The tilt table has a leak in the hydraulics, traced it to a block that I believe has a hairline crack somewhere as new fittings didn't fix. Functions ok just leaks and needs topped off from time to time. Tool Rack needs new holding clips, may need some new polishing heads as a few that we have are a bit rusty but we have 8 overall. The tool gripper assembly in the spindle still functions ok but could use replacing, have a new 1 that comes w/machine. All grease has been replaced and bearings replaced/confirmed good, have spare bearings that come w/machine. Software is good, reset and optimized w/Denver Techs in Italy. Have some other random spare parts and preventative maintenance supplies. Was inside till about a month ago, heavily tarped and outside currently. Have pics and a video of it running. I need to edit it down still so by request preferably.

Overall dimensions & weight Machine (length, width and height). mm 5799x2771x2652 Machine weight kg 3200 Technical specifications Work surface (length, width and height). mm 3800x1900x680 Longitudinal stroke ("X" axis) mm 3300 Cross stroke ("Y" axis) mm 1625 Vertical stroke ("Z" axis) mm 340 "X" and "Y" axes speed m/min 0÷10 Tool rotation speed RPM 500 Total installed power S1 kW 11 Spindle electrical power S1 kW (Hp) 9,2 (12,5) Electrical voltage (380 Three-phase) V 380 Electrical frequency Hz 50 Pneumatic system working pressure bar 6 Water system pressure bar 2 Water consumption lt/min 25 Tool specifications "plato" diameter mm 350 Quick coupling tool support diameter mm 350/400 Maximum work dimensions and material types Length mm 3600 Width mm 1950 Height mm 250÷280 Maximum weight kg 2500 Marble Granite Stone Bricks Ceramic Installation area specifications room temperature range °C 5÷40 5÷40 Maximum altitude (above sea level) m 1000 1000 Relative humidity (for temperature between 40° and 20° C) % 50÷90 50÷90 Minimum recommended lighting LUX 500 500 Optional accessories and equipment Swinging work surface Tilt angle ° 0 ÷ 84 Maximum workable work piece dimensions mm 1950x3600