2016 Ghines Systar Basic

Sales Representative Name: Justin Luth Phone Number: 855-456-2588 EXT. 1004 Category: Sink Cut-Out Machines Year: 2016 Make: Ghines Model: Systar Basic Under Power: No Voltage: 230v 3phase 60hz Location: Washington State Asking Price: $9,500.00 FINANCING AVAILABLE FROM 12 TO 60 MONTHS - ONE PAGE APPLICATION & 3 MONTHS BUSINESS BANK STATEMENTS REQUIRED. CLICK ON FINANCING TAB ON HOME PAGE FOR FURTHER INFORMATION OR CALL US AT 855-456-2588 2016 Ghines Systar Basic SPECIFICATIONS OPERATING AREA - Work surface made of smooth stone calibrated by the machine itself - Maximum length workable with profiling tools : 3000 x 1100 mm - Max. length of straight cut with blade: 3000 mm - Max. length of inclined 45° mitre cut with blade: 2800 mm - Maximum length for edge polishing (also 45°): 3000 mm - Maximum slab thickness for disc cutting: 40 mm for vertical cuts and 30 mm for 45° miter cuts - Maximum slab thickness for profiling edge polishing: 60 mm (on vacuum cups) - Maximum slab thickness for polishing flat edge: 80 mm (on table) FRAMEWORK - Tubular steel frame coated with ceramic and epoxy paint - Dimensions: 3500 x 1700 x 1650 (h) mm - Weight: 650 kg TEMPLATE ON TOP - Fixed by 4 suction cups Ø120 mm STEEL LINEAR GUIDES - Longitudinal movement: hardened, anti-corrosion treated, steel slide guides with recirculation balls block. - Transversal movement: hardened, anti-corrosion treated, steel slide guides with recirculation balls block. OPERATING HEAD - Electrospindle: 2.2 kW (3HP) with internal lubrication. - Spindle: - Stainless steel - Connection: ½” gas F - Rotation speed: from 1500 to 12500 rpm, with digital display on the control panel - Vertical movement operated by a hand crank - Vertical stroke: 100 mm - 3 spindle modes: Vertical (for profiling and slot cutting) 45° inclination (for disc cutting and bevel polishing) Horizontal (for disc cutting and edge polishing) - Manual lifting and locking the operating head - At the start of the spindle motor the internal water lubrication is activated automatically ORTHOGONAL MOVEMENT - Slide guides are equipped with adjustable mechanical limit switches. VACUUM SYSTEM TO FIX THE WORKPIECE AND TEMPLATE* 1 vacuum system with 8 connections to hold the work piece and template firmly in position: - Vacuum ejector pump - Pressure regulator - Manometer - 4 Suction cups work piece: Ø90 mm, can be excluded individually - 4 Suction cups template: Ø120 mm with internal thread - Connection pipes: 4 m, Ø 6 mm - Compressed air gun * required: minimum 6 bar pressure, 150 l/min, recommended: compressor minimum 4 kW, 300 l/min, 8 bar pressure WATER CONNECTION* - Tool lubrication: internal and external by water hoses - Water gun * required: minimum 2 bar pressure, 15 l/min SUPPLY - Electrical power: 230 V–50/60 Hz single-phase (16A) - Power unit: IP 65 drive according to CE standards (low tension controls on the control panel) Machine is available for inspection Machine is sold as is/where is and implies no warranties Buyer is responsible for tear down, rigging, shipping, and installation Machine is subject to prior sale.