Sales Representative Name: Justin Luth
Phone Number: 855-456-2588 EXT. 1004
Category: Sink Cut-Out Machines
Year: 2016
Make: Ghines
Model: Systar Basic
Under Power: No
Voltage: 230v 3phase 60hz
Location: Washington State
Asking Price: $9,500.00
FINANCING AVAILABLE FROM 12 TO 60 MONTHS - ONE PAGE APPLICATION & 3 MONTHS BUSINESS BANK STATEMENTS REQUIRED. CLICK ON FINANCING TAB ON HOME PAGE FOR FURTHER INFORMATION OR CALL US AT 855-456-2588
2016 Ghines Systar Basic
SPECIFICATIONS
OPERATING AREA
- Work surface made of smooth stone calibrated by the machine itself
- Maximum length workable with profiling tools : 3000 x 1100 mm
- Max. length of straight cut with blade: 3000 mm
- Max. length of inclined 45° mitre cut with blade: 2800 mm
- Maximum length for edge polishing (also 45°): 3000 mm
- Maximum slab thickness for disc cutting: 40 mm for vertical cuts and 30 mm for 45° miter cuts
- Maximum slab thickness for profiling edge polishing: 60 mm (on vacuum cups)
- Maximum slab thickness for polishing flat edge: 80 mm (on table)
FRAMEWORK
- Tubular steel frame coated with ceramic and epoxy paint
- Dimensions: 3500 x 1700 x 1650 (h) mm
- Weight: 650 kg
TEMPLATE ON TOP
- Fixed by 4 suction cups Ø120 mm
STEEL LINEAR GUIDES
- Longitudinal movement: hardened, anti-corrosion treated, steel slide guides with recirculation balls block.
- Transversal movement: hardened, anti-corrosion treated, steel slide guides with recirculation balls block.
OPERATING HEAD
- Electrospindle: 2.2 kW (3HP) with internal lubrication.
- Spindle:
- Stainless steel
- Connection: ½” gas F
- Rotation speed: from 1500 to 12500 rpm, with digital display on the control panel
- Vertical movement operated by a hand crank
- Vertical stroke: 100 mm
- 3 spindle modes:
Vertical (for profiling and slot cutting)
45° inclination (for disc cutting and bevel polishing)
Horizontal (for disc cutting and edge polishing)
- Manual lifting and locking the operating head
- At the start of the spindle motor the internal water lubrication is activated automatically
ORTHOGONAL MOVEMENT
- Slide guides are equipped with adjustable mechanical limit switches.
VACUUM SYSTEM TO FIX THE WORKPIECE AND TEMPLATE*
1 vacuum system with 8 connections to hold the work piece and template firmly in position:
- Vacuum ejector pump
- Pressure regulator
- Manometer
- 4 Suction cups work piece: Ø90 mm, can be excluded individually
- 4 Suction cups template: Ø120 mm with internal thread
- Connection pipes: 4 m, Ø 6 mm
- Compressed air gun
* required: minimum 6 bar pressure, 150 l/min, recommended: compressor minimum 4 kW, 300 l/min, 8 bar pressure
WATER CONNECTION*
- Tool lubrication: internal and external by water hoses
- Water gun
* required: minimum 2 bar pressure, 15 l/min
SUPPLY
- Electrical power: 230 V–50/60 Hz single-phase (16A)
- Power unit: IP 65 drive according to CE standards (low tension controls on the control panel)
Machine is available for inspection
Machine is sold as is/where is and implies no warranties
Buyer is responsible for tear down, rigging, shipping, and installation
Machine is subject to prior sale.
We use cookies to improve your experience. Privacy Policy.