Description
2015 Northwood SJ-270-Dual Table
*video of machine*
Information subject to verification from buyer:
144″ x 84″ Work Table
Full 270°Operator Access to front ofSawJETwith Low Tank worktable to increase efficiency through ease of loading/unloading.
100% Water Containment in Tanks – Sides of Tanks are above slabs being cut – water is raised in tanks to
submerge slabs while cutting, so not adding water to tanks constantly – water is not running over sides onto floor or onto rails.
Fanuc 0iMD CNC with Integrated PC-Features
KMT Streamline™ SL-E 50 Series
50 HP (460v 3phase)
60,000 psi Maximum pressure range
KMT Waterjet IDE™ II Abrasive Waterjet Cutting Head
BULK ABRASIVE TRANSFER SYSTEM
500 lb. capacity
Top Loading
Filling port is locked by internal air pressure
GARNET METERING SYSTEM WITH FLOW SENSOR
MATERIAL THICKNESS PROBE AND COLLISION DETECTION SYSTEM
HIGH-PERFORMANCECNC SMARTSAW WITH SERVOTILT
SawJET™ Sawing Head
• 360 Degree programmable Saw Head
• Direct-Drive High-Torque Smart Saw maintains constant torque.
• 14” (356mm) diameter blade which provides more stability in saw cuts with less blade deflection + cuts
more linear inches reducing waterjetusage and expense. Blades are affordable.
• Automatic Z-Axis Blade Oscillation for plunge cutting without blade deflection and de-tensioning for
improved accuracy and blade life
• SmartSaw™ Monitoring System – Amperage Load of Saw Motor is monitored continuously –
Feedspeed is automatically increased and decreased as load rises or falls. Maximum load is
programmable. Allows for Faster Programmed Feedspeeds without Operator intervention.
SERVOTILT PROGRAMMABLE MITER SAW
ServoTilt offers fully programmable 0 to 48 degrees miter saw. Able to miter cut at any unique angle to provide
flexibility not only for countertops, but also fireplace surrounds and other unique miter applications.
AXES SPECIFICATIONS
Two (2) horizontal linear axes ( X and Y).
One (1) vertical linear axis ( Z ).
Two (2) programmable rotary axes (C and B)
AXES TRAVEL
X Axis – (left to right – gantry width) …………………………………………………………………… 180” (4572 mm)
Y Axis– (front to back – gantry depth) ………………………………………………………………….. 88” (2235 mm)
Z Axis – (up and down) ……………………………………………………………………………………….. 12” (305 mm)
C Axis – (360° programmable C-Axis Saw) ………………………………………………………………………………………. 360°
B Axis – (48° programmable Miter ServoTilt Saw) ……………………………………………………………………………… 48°
AXES TRAVERSE/FEED RATES
X Axis Rapid Traverse Rate ……………………………………………………………………… 2,150 IPM (80 m/min)
Y Axis Rapid Traverse Rate ……………………………………………………………………… 2,150 IPM (80 m/min)
Z Axis Rapid Traverse Rate ………………………………………………………………………… 500 IPM (12 m/min)
X Axis Maximum Machining Feed Rate ……………………………………………………… 2,150 IPM (80 m/min)
Y AxisMaximumMachining FeedRate ………………………………………………………… 2,150 IPM (80 m/min)
Z Axis MaximumMachining FeedRate …………………………………………………………… 500 IPM (12 m/min
MACHINE FOOTPRINT
Front to Back ………………………………………………………………………………………………………… 153” (3886 mm)
Left to Right …………………………………………………………………………………………………………. 225” (5715 mm)
All footprint values are for estimation purposes and are subject to change during machine design.
Approximate Weight …………………………….. 25,000lbs
Recommended Lift/Fork Truck Capacity ……40,000lbs.
Machine Voltage: 230 volt 3-Phase (60 AMPS)
Machine is available for inspection
Machine is sold as is/where is and implies no warranties
Buyer is responsible for tear down, rigging, shipping, and installation
Machine is subject to prior sale.
